Hello everyone,
I have a first generation K1 Max, and after initial difficulties and some known changes, it now prints perfectly.
I thought it would, but unfortunately it doesn't.
I now need prints that are 280 mm long and 100 mm wide, i.e. a rectangle.
The angle of this rectangle is not correct, I have printed the part once lengthwise in the direction of the Y axis and once lengthwise in the direction of the x axis, in both cases the angle is not correct.
I have re-tensioned the timing belts several times, but this has not helped.
The angle deviation is approx. 1-2 degrees
I am grateful for any help.
I have a first generation K1 Max, and after initial difficulties and some known changes, it now prints perfectly.
I thought it would, but unfortunately it doesn't.
I now need prints that are 280 mm long and 100 mm wide, i.e. a rectangle.
The angle of this rectangle is not correct, I have printed the part once lengthwise in the direction of the Y axis and once lengthwise in the direction of the x axis, in both cases the angle is not correct.
I have re-tensioned the timing belts several times, but this has not helped.
The angle deviation is approx. 1-2 degrees
I am grateful for any help.
