Not sure if this is the right place for this but here goes, I have had this printer for over 2 years and only printed a few things because I can never get the prints to come out right. No matter how much time I spend leveling the bed and getting it exactly right, the prints always lean forwards. I have done just about everything possible but I am at my wits end now and thinking of taking the loss and selling it and getting something easier to use. This is my last check before I do to see if anyone has had similar issues and what they did to fix them.
Height doesn't seem to be an issue, no matter how tall the print it still has this issue. What should be straight and flat will instead look like a foot.
One thing I have noticed recently is that right in the middle of travel there is an odd flat spot in the movement of the print head almost like a ridge or something has built up, this is in both axis in 1 spot only. Dunno if any other 5 series users have noticed this?
To be clear, yes I own a level, I have bought several including a couple of digital ones to try and solve this but it made no difference.
I will try any and all reasonable suggestions.
Thanks.
Height doesn't seem to be an issue, no matter how tall the print it still has this issue. What should be straight and flat will instead look like a foot.
One thing I have noticed recently is that right in the middle of travel there is an odd flat spot in the movement of the print head almost like a ridge or something has built up, this is in both axis in 1 spot only. Dunno if any other 5 series users have noticed this?
To be clear, yes I own a level, I have bought several including a couple of digital ones to try and solve this but it made no difference.
I will try any and all reasonable suggestions.
Thanks.